Electrical -12 volt

!
PEN RI450
Weight: kg

12 Volt Jack plug c/w fuse

PEN RI407
Weight: kg

12 volt socket recessed with flap

PEN PO936
Weight: kg

12 volt socket to 3 metre extension lead

MC VL-147
Weight: kg

12v 21w SBC BA15D bulb

MC VL-163
Weight: kg

12v Bulbs( side & tail) 10w

MC VS-026
Weight: kg

12v push/pull switch

Durite 0-603-00
Weight: kg

12v Switch - Metal Dolly 2 way On/Off

PEN PO350
Weight: kg

12volt /2 flat pin black plug

PEN PO932
Weight: kg

12volt Adaptor to - crocodile clips

PEN PO933
Weight: kg

12Volt adaptor to 2 x 12v sockets

CABLE

25mm2 Cable - 170amp

£ 6.80 Per metre
PEN PO914
Weight: kg

2amp 3 pin plug 12 volt

MC VS-047
Weight: kg

3 Switch Panel 12v

Dimensions (H x W x D): 90mm x 110mm x 50mm Voltage Input: 12v
CEF OM15S
Weight: kg

5 amp Unswitched Socket- Single

BBMC390
Weight: kg
0043f718 bbmc390

5 in 1 Universal Mobile Charger 12v

PEN 4304216
Weight: kg

BA15D 21/5 watt Autolamp

PEN 4304196
Weight: kg

BA9S/4 watt Automotive bulb

LK
Weight: kg

Battery isolation switch

 

MC VS-033
Weight: kg

Battery Switch - Red Key TAI AAA

12V/100Amp - Diameter: 60mm OD (base).
MC VS-034
Weight: kg

Battery switch 1-2 both 175amp

NAPS 0-0605-11
Weight: kg

Battery Switch 300 AMP Rotary Marine

 

Marine battery isolator Switch. Removable control knob in the off position. Rated at 300 amps continuous (1 hr) at 48 volts DC and 1000 amps for 5 seconds. M 10 studs. l 69 x w 77 x h 69 mm. CE approved.

MC VS-251
Weight: kg

Battery Switch Heavy Duty 12v - 200A

Diameter: 65mm Height: 125mm Rating: 180A continuous.1000A (5 secs) Connections type: 10mm studs.
MC JAB-20DA
Weight: kg

Bilge pump - Rule 800GPH - 3028 LPH 12 v

Up to 50 litres/minute (11 gallons/minute). Maximum
Up to 50 litres/minute (11 gallons/minute) Maximum recommended discharge head:  2m Outlet: 3/4'' (19 mm) hose tail Recommended Fuse Size: - 5 A (at 12 V) Dimensions: 95 mm high, 60 mm base diameter.
MC JAB-RM55B
Weight: kg

Bilge pump - Rule mate 500 12 v

The Rule RM500B is a fully automatic bilge pump incorporating field sensor technology that eliminates the need for a mechanical float switch. A great solution for a modern engine bay, the level sensor is sealed into the body of the pump and the pump is automatically activated when the sensor detects a 50mm level of water and switches off at 9mm.

• Connections: For 19mm (3/4") or 25mm (1") bore hose on inlet and outlet. Straight or 90deg Elbow.

• Dimensions: 112mm high, 130mm long, 73mm wide.

• Fuse Size: 4 (amp).

• Output: Up to 31 litres/minute (7 gallons/minute). Max. recommended discharge head 2m.

• Fully automated bilge pump with integral sensor.

• Back up feature to prevent dry running if sensor is fouled, pump reverts to 2.5 minute cycle mode.

• Compact pump for smaller vessels.

• Tough plastic body.

AQ 833201
Weight: kg

Busbar - Blue Sea 10 gang common bus

  • The industry standard busbar for positive distribution and the collection of negative or AC ground circuits


    Specifications

    Cont. Rating: 130 Amps AC / 150 Amps DC
    Max Voltage Rating: 300V AC / 48V DC
    Bus Material: Tin-Plated Copper
    Base Material: Reinforced Polycarbonate